Alternator
Bracket Shaving
A little grinding will provide a whopping half-inch of clearance.
Detail Work
As with any project, the details are seemingly endless. Here are a few of the more critical examples.
Coolant
Diverter Clearancing
Rearranging the KL coolant tubing was an easy, elegant solution, but a little hole-slotting was necessary...
Driver-Side Cylnder Head
... and a little die-grinding.
Driver-Side Rail
Driver's side cylinder head has miniscule clearance to the engine-bay rail, so slicing off a 3/8" section was in order.
Driver-Side Subframe Edge
The headers are a very tight fit down by the starter, so the inner 1/2" (where the spotwelds are) of the rear section was removed.
